Wall Panel I-Shaped Strips
Wall Panel I-Shaped Strips
Wall Panel I - Shaped Strips refer to the "I" shaped strip parts used in wall decoration or structural construction, which can also be called "I-shaped strips" and "I-shaped strips". It is part of a wall decoration system or a structural component of a building that is both decorative and functional,
Products Description
| Products name | Wall Panel I-Shaped Strips |
| Material | Aluminum, such as 6063 - T5, etc |
| Surface treatment | anodizing, fluorocarbon spraying, etc., |
| Length | Generally, there is a standard length of 3m, and 2.44m, 2.5m, 2.7m and other lengths can also be customized. |
| Applicable panel thickness | 3mm, 4mm, 5mm, 6mmpanels of equal thickness. |
| Width | Common sizes are 6mm, 8mm, 10mm, 12mm, etc. |
| Thickness | usually between 0.4 - 2mm, can be customized. |
| Cross-sectional shape | Standard I-shape, consisting of upper and lower parallel flanges and a vertical web in the middle, the specific size ratio varies according to the product design |
| Packaging | Specially designed plastic bags or other packaging methods are used to protect the product from damage during transportation and storage. |
| Customizable | YES |
Product floor plan
Surface treatment process & aesthetics
Wall Panel I - Shaped Strips are anodized or sprayed to provide a significantly higher surface hardness, with common brushed, mirror polished or sandblasted finishes to enhance aesthetics and enhance surface abrasion resistance through physical processes. Aluminum does not absorb water at all and will not rust or deform when soaked in water for a long time.
01
Dimensions & Specifications
Wall Panel I - Shaped Strips are available in sizes that vary from customer to customer and product range, and are available in 3mm, 4mm, 5mm, etc., with standard lengths typically 3 meters. Non-standard lengths tailored to specific wall dimensions to reduce splicing and improve overall aesthetics.
02
Surface treatment process
Through electrostatic spraying or powder spraying on the surface to form a layer of coating, with weather resistance, can resist ultraviolet rays, not easy to fade or oxidize, a variety of colors can be customized such as champagne gold, bronze and other effects, at the same time, the oxide film and the substrate are firmly combined, strong corrosion resistance, long-term resistance to the erosion of acid and alkali substances, suitable for kitchen, laboratory and other special environments.
03
Ease of installation & easy construction
Wall Panel I - Shaped Strips are designed with ease of installation in mind. Snap-on or slotted designs may be used so that the trim can be spliced directly to the wall or tile edge, without the need for complex tools and installation processes, even for non-professional construction personnel, after a simple study and guidance, the installation can be carried out relatively smoothly.
04
Application scenarios
1. Home decoration scenes: living rooms, bedrooms, studyes, corridors and other wall edges or corners. Protect the sunny corners of the wall from collision damage, especially suitable for families with children or the elderly.
2. Commercial and office space: hotel lobby, shopping mall exhibition hall, office building elevator room. Use anti-collision shaped strips to protect the wall and reduce potential safety hazards.
3. Construction engineering and outdoor scenes: residential exterior walls, commercial building facades, balcony guardrail edges. The aluminium material is corrosion-resistant, UV-resistant, suitable for outdoor environments, and prevents rain from eroding wall joints.
4. Application in special scenes: no need to remove the original wall, directly cover and install special-shaped strips, quickly block cracks, stains or old decorations, and reduce the renovation cost and construction period.
Hot Tags: wall panel i-shaped strips, China wall panel i-shaped strips manufacturers, suppliers, factory
You Might Also Like
Send Inquiry