As a new type of curtain wall decoration materials, the curtain wall aluminum veneer has the advantages of other materials in terms of color diversity, material extensibility, and waste recyclability.
The thickness selection of aluminum veneer has been plagued by many consumers. So, how thick is the appropriate choice of aluminum veneer?
1. For the aluminum veneer for curtain wall, the design unit will generally use a thicker aluminum veneer when considering factors such as compression resistance and wind resistance, and more aluminum veneers of 2.5mm or 3.0mm are used; Especially for the flat part of some high-rise buildings, the choice of a slightly thicker aluminum veneer is better than that of a thinner aluminum veneer. In some glass curtain wall projects, when the aluminum veneer serves as a decorative edge, You can choose a thinner aluminum veneer, such as 2.0mm; the main and auxiliary keels of the thicker aluminum veneer must be enlarged during installation.
2. For indoor ceiling aluminum veneer, you can choose a thinner aluminum veneer, such as 1.5mm or 2.0mm. Indoor ceiling aluminum veneer generally has a small single piece area, and there are 20mm hems around the board surface. The surface of the board is not easy to deform and does not affect the flatness, so the thickness of the aluminum plate can be adjusted appropriately; for the special-shaped indoor ceiling, because of the need of modeling, a slightly thicker aluminum plate can be selected. When designing the thickness, the designer takes into account the strong and strong keel as much as possible. The curtain wall aluminum veneer is not as thick as possible, but it is adjusted according to the actual situation on site and according to the location where the aluminum veneer is installed. Without affecting the effect and practicality, the thinner aluminum veneer can appropriately reduce the construction cost of the user.
