Metric Extruded Aluminum Channel
Product Description
It is known as architectural aluminium channel, generally used and accepted inindustrial,manufacturing and construction based on its good malleability.All aluminum extrusion channel shapes are available in mill finish, clear anodized, black anodized, gold anodized, and painted.In addition to a wide range of channels in various shapes and sizes, it offers a complete choice of structural angles, tees.We expertise in the design and fabrication, which means that we can satisfy every application and our products will exceed your expectations.
Material Introduction
Chemical Composition of Aluminum Extrusion Profiles | |||||
Alloy | 6063 | 6061 | 6060 | 6005 | |
Si | 0.2-0.6 | 0.4-0.8 | 0-0.6 | 0-0.9 | |
Mg | 0.45-0.9 | 0.8-1.2 | 0.35-0.6 | 0.4-0.6 | |
Fe | ＜0.35 | ＜0.7 | 0.1-0.3 | 0.35 | |
Cu | ＜0.1 | 0.15-0.4 | ≤0.1 | 0.1 | |
Mn | ＜0.1 | ＜0.15 | ≤0.1 | 0.1 | |
Zn | ＜0.1 | ＜0.25 | ≤0.15 | 0.1 | |
Cr | ＜0.1 | 0.04-0.35 | ≤0.05 | 0.1 | |
Ti | ＜0.1 | ＜0.15 | ＜0.1 | 0.1 | |
Impurity | Unit | ＜0.05 | ＜0.05 | ＜0.05 | ＜0.05 |
Total | ＜0.15 | ＜0.15 | ＜0.15 | ＜0.15 | |
Al | Remainder | Remainder | Remainder | Remainder | |
Technical Data of Aluminum Extrusion Profiles | ||||||
Alloy | Temper | Thickness | Tensile | Yield | Vickers | Webster |
Strength | Strength | Hardness | Hardness | |||
6005 | T6 | ≤5 | ≥270MP | ≥225MP |
|
|
T6 | 5＜e≤10 | ≥260MP | ≥215MP |
|
| |
T6 | 10＜e≤25 | ≥250MP | ≥200MP |
|
| |
6060 | T6 | ≤3 | ≥190MP | ≥150MP |
|
|
T6 | 3＜e≤25 | ≥170MP | ≥140MP |
|
| |
6061 | T6 |
| ≥265MP | ≥245MP | HV≥58 | HW≥8 |
6063 | T5 |
| ≥160MP | ≥110MP | HV≥58 | HW≥8 |
T6 |
| ≥205MP | ≥180MP | HV≥58 | HW≥8 | |
Features
◆ Workability: It has good acceptance of applied coatings such as anodized or painted finishes.6063 channels are fairly easy to weld, and are relatively soft and easy to cut.
◆Good quality raw materials: 6063 alloy has good acceptance of applied coatings such as anodized or painted finishes. 6063 channels are fairly easy to weld, and are relatively soft and easy to cut.6063 alloy can be machined, but does not machine as well as harder alloys like 6061.
◆Anodizing:It is an chemical process that accelerates and thickens the naturally occurring protective oxide layer.No chipping,no flaking,no peeling
◆Machine finish:For the purpose of removing minor imperfections and developing a lustrous finish.
Sectional Drawing
Product View
Packing
FAQ
Q1.What is your standard cut length tolerance and can I specify a special tolerance?
A: Our standard tolerance on the length cut is "±.003". If you require a special tolerance, please note this on the order either in the notes or in the "specific cut length" field.
Q2.How long it would take to deliver?
A:10-20 days normally.
Q3.What about the quality?Does the aluminium channel meet European standard?
A:Self-inspection would be done before shipping.And our products will meet local standards.
Q4.Apart from standard aluminium extrusion production,what about custom dimension?
A:Custom products are extremely welcomed.If we do not have the extruded aluminum channel that meets requirements, our professionals will assist you with engineering. We guarantee that we can create the aluminum channel shapes that meet your size specifications.
Hot Tags: metric extruded aluminum channel, China metric extruded aluminum channel manufacturers, suppliers, factory, aluminium u section extrusion, led aluminium extrusion, extruded aluminum u channel, u channel extrusion, bendable led extrusion, extruded aluminum t channel
You Might Also Like
Send Inquiry