Aluminium Heat Sink Radiator
Aluminium Heat Sink Radiator
Due to its high malleability and good corrosion resistance, it is easy to be extruded through extrusion dies in order to create the unique and specific shapes that are ordered. This kind of heat sink radiator is an extreme cooling solution,which can eliminate the cost and provide a high degree of heat dissipation .In addition to performance,'YIDA' company also provide a wide range of secondary metal fabrication service,including precise cutting,punching,drilling etc.
Material Introduction
|
Aluminium Alloy Chemical Composition |
||
|
Alloy |
6063 (%) |
6061 (%) |
|
Si |
0.2-0.60 |
0.4-0.8 |
|
Fe |
0.35 |
0.70 |
|
Cu |
0.10 |
0.150-.40 |
|
Mn |
0.10 |
0.15 |
|
Mg |
0.45-0.90 |
0.80-1.20 |
|
Cr |
0.10 |
0.04-0.35 |
|
Zn |
0.10 |
0.25 |
|
Ti |
0.10 |
0.15 |
|
Al |
Remainder |
Remainder |
|
Tensile strength |
σ b (Mpa): ≥ 250 |
σb (MPa)：≥180 |
|
Elongation stress |
σ p0.2 (Mpa): ≥ 110 |
σ p0.2 (Mpa): ≥ 110 |
|
Elongation |
δ 5 (%): ≥ 7 |
δ5 (%)：≥14 |
◆Aluminum 6063-T5, k = 201 W/mK (most common)
◆Aluminum 6061-T5, k =167 W/mK
Product parameters
|
Item No. |
Section |
Material |
Height (mm) |
Width (mm) |
Thinckness (mm) |
Area (mm²) |
Weight (kg/m) |
|
H06001 |
 |
6063-T5 |
24±0.2 |
60±0.2 |
1.9 |
416.4 |
1.12 |
|
H06002 |
|
6063-T5 |
23.3±0.2 |
117 |
3.8±0.2 |
625.61 |
1.71 |
|
H06003 |
 |
6063-T5 |
23.3±0.2 |
94±0.2 |
3.8±0.2 |
626.45 |
1.71 |
|
W77001 |
|
6063-T5 |
45 |
95 |
4.5 |
1267 |
3.45 |
Features
◆RoHS compliant
◆High malleability and good thermal conductivity
◆Extrusion profiles are available in straight fin, STAR LED, and linear LED designs, ensuring maximum performance for a particular thermal application
Notes and Recommendations:
◆Dimensional limitations are dependent upon extrusion die size as well as overall profile design
◆Custom extrusions utilize standard commercial extrusion tolerances
◆Rapid prototypes and short run parts available with existing tooling
Product Introduction
It can extend the service life
Aluminum heat sinks have high thermal conductivity and are able to quickly conduct heat from the heating element to the surface of the heat sink and dissipate it into the air through the heat sink for efficient heat dissipation. It is light and easy to install and carry, while the aluminum material has good corrosion resistance and oxidation resistance, which can prolong the service life.
Corrosion resistance and aesthetics
surface of the aluminum radiator can be anodized, painted and other treatments for its corrosion resistance and aesthetics. These treatments also improve the surface hardness of the radiator and prevent scratches and abrasion.The natural heat dissipation method is adopted, which does not require additional energy consumption, which is in line with the concept of energy conservation and environmental protection.
Application scenarios are customized
heat sink of aluminum radiator is usually made by extrusion, stretching and other processing techniques, and has various shapes, such as fin type, needle fin type, etc., to increase the heat dissipation area and improve the heat dissipation efficiency.It can be customized according to different heating elements and application scenarios, such as changing the shape, size and number of heat sinks to meet different heat dissipation needs.
It needs to be checked regularly
It can be connected and fixed with the heating element by bolts, buckles, etc. During the connection process, it is necessary to ensure that the contact surfaces are tightly fit to reduce thermal resistance and improve heat dissipation.
In order to ensure the long-term stable operation of aluminum radiators, they need to be cleaned and maintained regularly. Remove dust and dirt from the surface of the radiator, maintain its heat dissipation performance, check whether the connections are loose or damaged, and replace or repair them in time.
Product display and application
Electronic and electrical industry: High-performance components such as CPUs and graphics cards in computers, mobile phones, tablets and other equipment are usually equipped with aluminum heat sinks to absorb and dissipate the heat generated to prevent overheating from degrading or damaging performance.
Automotive industry: Aluminum radiators are widely used in automotive cooling systems, such as engine radiators, air conditioning radiators, etc., to effectively reduce engine temperature and improve the efficiency and safety of automobiles.
Machinery and equipment industry: In various mechanical equipment, such as air compressors, generators, etc., aluminum radiators are also often used for heat dissipation treatment to ensure the long-term stable operation of equipment.
Architectural decoration industry: Aluminum radiators are also commonly used in the heat dissipation decoration of the exterior of buildings, such as aluminum alloy shutters, tuyeres, etc., which not only ensure the heat dissipation effect, but also beautify the appearance.
FAQ
Q:Can you create custom heat sink for me?
A:Yes, we can customize it according to the customer's requirements.
Q:What is your standard cut length tolerance and can I specify a special tolerance?
A: Our standard tolerance on the length cut is "±.003". If you require a special tolerance, please note this on the order either in the notes or in the "specific cut length" field.
Q:If i received my heatsink and the base is bowed, is this normal?
A: Extrusion is not always perfectly flat. we try to stay well within standard industry tolerances for flatness, twist, etc.If it requires the base of the heat-sink to be perfectly flat, face milling is recommended. We can provide a quote for this if requested.
Hot Tags: aluminium heat sink radiator, China aluminium heat sink radiator manufacturers, suppliers, factory, Aluminium Extrusion Heat Sink, extruded aluminum heat sink, round heat sink extrusion, round extruded aluminum hea tsink, round extruded aluminum heat sink, Aluminium Frame Profile
You Might Also Like
Send Inquiry