IMG_2264
IMG_2265
IMG_2266

Aluminium Alloy Extrusion Window Profile

Aluminum alloy extrusion window profile s are widely used for windows frames. It prevents product from insulation and a huge volume of noise outside. Hot-cracked aluminium profiles are easily made from aluminium profiles and some insulation materials. When family uses the this window profile for decoration, you can save at least 40% of the building energy, and isolate 70% of the outdoor heat, cooling and noise.

Send Inquiry

Product Introduction

Product Description

Aluminum material is the perfect choice for the window, because it has natural corrosion resistance and can be maintained free.When using stainless steel as raw material, though it combines iron,chromium that helps improve corrosion resistance ,it can be a little expensive.In addition,stainless steel can get marked up by fingerprint and grease.And in costal area, the corrosion issue get even worse Therefore, assume that aluminium doors are mainly recommended for external steel doors unless you need structural strength of steel for use or for safety reason.

Technical Parameter

Chemical Composition of Aluminum Extrusion Profiles
Alloy		6063	6061	6060	6005
Si		0.2-0.6	0.4-0.8	0-0.6	0-0.9
Mg		0.45-0.9	0.8-1.2	0.35-0.6	0.4-0.6
Fe		＜0.35	＜0.7	0.1-0.3	0.35
Cu		＜0.1	0.15-0.4	≤0.1	0.1
Mn		＜0.1	＜0.15	≤0.1	0.1
Zn		＜0.1	＜0.25	≤0.15	0.1
Cr		＜0.1	0.04-0.35	≤0.05	0.1
Ti		＜0.1	＜0.15	＜0.1	0.1
Impurity	Unit	＜0.05	＜0.05	＜0.05	＜0.05
Impurity	Total	＜0.15	＜0.15	＜0.15	＜0.15
Al		Remainder	Remainder	Remainder	Remainder

Technical Data of Aluminum Extrusion Profiles
Alloy	Temper	Thickness	Tensile	Yield	Vickers	Webster
Alloy	Temper	Thickness	Strength	Strength	Hardness	Hardness
6005	T6	≤5	≥270MP	≥225MP
	T6	5＜e≤10	≥260MP	≥215MP
	T6	10＜e≤25	≥250MP	≥200MP
6060	T6	≤3	≥190MP	≥150MP
6060	T6	3＜e≤25	≥170MP	≥140MP
6061	T6		≥265MP	≥245MP	HV≥58	HW≥8
6063	T5		≥160MP	≥110MP	HV≥58	HW≥8
6063	T6		≥205MP	≥180MP	HV≥58	HW≥8

Extrusion Workshop

Q&A

Q1: What color you can do for powder coating?
A: We can do any color for powder coat according to customer's color sample.Just notice in advanced.

Q2: What's the thickness for anodizing

A: Our normal thickness is about 10 um. And we can do 15um and above.

Q3: What color you can do for wood transfer?
A: We can do according to the color samples you provide.

Q4: What certification do you have?
A: We have ISO certification.

Q5: What's the delivery time for samples and mass production?
A: 2 weeks to open the new moulds.Mass production:3-4 weeks after receipt of deposit and confirmation of the order.

Hot Tags: aluminium alloy extrusion window profile, China aluminium alloy extrusion window profile manufacturers, suppliers, factory, aluminum window extrusion profiles, aluminium profiles for windows and doors, aluminium window extrusions, aluminium window profile suppliers, aluminium window frame extrusions, aluminum window frame extrusions

Aluminum Window Frame Extrusion Profiles

No Information