Aluminium Alloy Round Tube
Product Description
Aluminium tube is easy to process and weld,which is made of silicon and magnesium. 6061 aluminium has the highest corrosion resistance in similar products, but its strength is lower than other heat treated aluminium alloys.If you need higher strength,there are other alloy can be chosen. Its common applications include hydraulic valve body, bottom plate, frame, structural components, electrical accessories, camera lens support and marine components. It can also be used in heavy-duty structures requiring metals with high corrosion resistance and good strength-weight ratio.
Material Introduction
Chemical Composition of Aluminum Extrusion Profiles | |||||
Alloy | 6063 | 6061 | 6060 | 6005 | |
Si | 0.2-0.6 | 0.4-0.8 | 0-0.6 | 0-0.9 | |
Mg | 0.45-0.9 | 0.8-1.2 | 0.35-0.6 | 0.4-0.6 | |
Fe | <0.35 | <0.7 | 0.1-0.3 | 0.35 | |
Cu | <0.1 | 0.15-0.4 | ≤0.1 | 0.1 | |
Mn | <0.1 | <0.15 | ≤0.1 | 0.1 | |
Zn | <0.1 | <0.25 | ≤0.15 | 0.1 | |
Cr | <0.1 | 0.04-0.35 | ≤0.05 | 0.1 | |
Ti | <0.1 | <0.15 | <0.1 | 0.1 | |
Impurity | Unit | <0.05 | <0.05 | <0.05 | <0.05 |
Total | <0.15 | <0.15 | <0.15 | <0.15 | |
Al | Remainder | Remainder | Remainder | Remainder | |
Technical Data of Aluminum Extrusion Profiles | ||||||
Alloy | Temper | Thickness | Tensile | Yield | Vickers | Webster |
Strength | Strength | Hardness | Hardness | |||
6005 | T6 | ≤5 | ≥270MP | ≥225MP |
|
|
T6 | 5<e≤10 | ≥260MP | ≥215MP |
|
| |
T6 | 10<e≤25 | ≥250MP | ≥200MP |
|
| |
6060 | T6 | ≤3 | ≥190MP | ≥150MP |
|
|
T6 | 3<e≤25 | ≥170MP | ≥140MP |
|
| |
6061 | T6 |
| ≥265MP | ≥245MP | HV≥58 | HW≥8 |
6063 | T5 |
| ≥160MP | ≥110MP | HV≥58 | HW≥8 |
T6 |
| ≥205MP | ≥180MP | HV≥58 | HW≥8 | |
Features
Unlike pipes, the external diameter and wall thickness of pipes are measured. Some examples of pipe applications are automotive parts, railings and courtyard furniture. OEM and other special requirements are available.
The product can be hardened by heat treatment. When annealed, 6061 aluminum alloy can be cold processed by standard method. This allows drilling, stamping, cutting, bending, tapping and deep drawing. 6061 aluminium plate can be welded by any common method

Packing And Shipping

FAQ
Q:What is your standard cut length tolerance and can I specify a special tolerance?
A: Our standard tolerance on the length cut is “±.003”. If you require a special tolerance, please note this on the order either in the notes or in the "specific cut length" field.
Q:Do you offer standard range of extruded aluminum profiles?
A: Yes, we can access a full range of standard extruded aluminum profiles on behalf of our customers. But, standard extruded aluminum profiles are just a small part of what we do: we specialize in bespoke, end-to-end solutions, which means that the vast majority of extruded aluminum components and profiles we supply are made according to our customers’ exact specifications.
Hot Tags: aluminium alloy round tube, China aluminium alloy round tube manufacturers, suppliers, factory, Aluminium Alloy Round Tube, Aluminium Half Round Tube, Extruded Aluminum Rail, Aluminum Hollow Round Tube, Aluminium Extrusions Round Tube
Previous
Aluminium Extrusions Round TubeNext
No InformationYou Might Also Like
Send Inquiry












