

The main reason
1. The unreasonable design of the working belt of the aluminum extrusion die leads to uneven metal flow;
2. The extrusion speed of the aluminum profile is too fast or the extrusion temperature is too high, resulting in uneven metal flow;
3. The unreasonable layout of the aluminum alloy lattice mold hole causes uneven metal flow;
4. The guide is not suitable or the guide is not installed;
5. The lubrication is not suitable.
Solution
1. Trim the working belt of the aluminum extrusion die to make the metal flow evenly.
2. Adopt a reasonable extrusion process, and try to use low-temperature extrusion under the premise of ensuring the outlet temperature.
3. Reasonable design of aluminum extrusion die structure.
4. Configure appropriate guides.
5. Reasonable lubrication.
6. Aluminum extrusion tractor is used for traction extrusion.




