-
Jul 25, 2025Causes and solutions of aluminum alloy scratches, rubbing, and bruisesAluminum alloy scratches, abrasions, and bruises are surface damages caused by aluminum profiles flowing out of die holes and coming into contact with tools, equipment, etc. in sub -
Jul 24, 2025Profile extrusion mold molding technologyThe manufacturing of aluminum extrusion tooling is also one of the key factors that determine its quality and service life. Because aluminum extrusion molds have a series of charac -
Jul 23, 2025How should aluminum extrusion dies be maintainedMold cost accounts for about 35% of the production cost of profile extrusion. The quality of the mold and whether the mold can be reasonably used and maintained directly determines -
Jul 22, 2025The effects of impurity elements on the surface quality of aluminum profiles ...The most common harmful impurities in aluminum is iron, in the production process of building aluminum profiles, when the iron content is greater than 0.25%, it has not been able t -
Jul 21, 2025Causes and solutions for yellowing of electrophoresis aluminum profilesThe reasons for the yellowing phenomenon of electrophoretic aluminum profiles are summarized as follows: electrophoretic paint itself; Poor oxidative conductivity; not washed thoro -
Jul 18, 2025Reasons and methods for maintenance of aluminum extrusion moldsExtrusion dies are the most important production tools to ensure the geometric size, cross-sectional shape and surface quality of aluminum profiles. In the process of extrusion mol -
Jul 16, 2025The effect of the surface quality of the extruded profile on the sealing qualityAt present, there are no direct tests to prove the relationship between extrusion, aging process and sealing degree, but the extrusion process can affect the generation, structure -
Jul 15, 2025The generation and avoidance of oil marks and watermark defects on the surfac...The characteristics of oil marks on the surface of aluminum profiles reflect: The oil stains of the aluminum profile are not wiped clean before aging, and a watermark is generated -
Jul 14, 2025What is the relationship between the surface treatment process conditions of ...The mastery of anodizing process conditions is closely related to the quality of the oxide film, because the process conditions are based on different process formulas, after a ser -
Jul 07, 2025The solution to the tail shrinkage defect of extruded aluminum profile extrud...Knowledge 1: Introduction to the common problems of tail shrinkage in the extrusion process of extruder: In the extrusion production of aluminum profiles, there will be defects com -
Jul 04, 2025Handling method of overtemperature fault of hydraulic system of aluminum prof...The hydraulic system of the aluminum extruder tractor sometimes has an oil temperature over-temperature fault alarm, resulting in equipment shutdown. According to the site situatio -
Jul 03, 2025Extrusion process and precautions for high-magnification aluminum extrusion r...1. For the aluminum extrusion die with high density and large tongue ratio, the first aluminum rod must be a short aluminum rod or pure aluminum rod of 150-200mm. 2. Before the mol




